Luojia motorcycle engine parts, electric scooters parts, electric taxi tricycle

The importance and necessity of motorcycle engine parts motorcycle engine parts break-in period is 1500 km of its initial run, with the new car for the period between the surfaces of the parts of the engine is in the adjustment of the grinding phase with each other, the larger amount of wear, electric scooter motor running The quality of life is affected motorcycles key. motorcycle engine parts in the run-in period to strictly enforce the speed limit load, regular maintenance requirements, in order to reduce the amount of wear of engine and transmission components, but also to give full play to the new car performance and extend the life of the vehicle. Note the use of specific (1) speed and the speed limit run-in period. Maximum engine mileage limit the maximum speed of the motorcycle speed limit initial 800 km 4500 revolutions per minute below 45 km / h 800-1600 km 55 km below 5500 rpm per minute / hour over 1600 km 8500 turn per minute below 85 km / h (2) In the run-in period, the engine speed should always change, the stall should be running, the throttle do not run continuously at a fixed speed, and its purpose is to make all parts of a balanced load, but can not exceed the specified maximum speed. (3) motorcycle engine size Before driving, let the oil circulating in the running period, regardless of the state before the heat engine or a cold start state should let the engine idle for sufficient time (3-5 minutes) preheated to allow the oil to flow All lubrication. (4) Note that in the run-in period, the engine cooling, should be appropriately controlled vehicles travel time, avoid prolonged running, usually every 30 minutes driving, you should turn off a break, in order to facilitate cooling the heat of the engine. Maintenance is very important for the first time (5) of the vehicle, the vehicle must be completed within 1000 km maintenance project for the first time will be seized. (6) for the first oil change, scooters and cycling are 500 kilometers across, the second oil change for 1000 km, after the replacement of every 2000-3000 miles (depending on road conditions with appropriate adjustments). Be sure to remind the user to use the construction of a motorcycle engine oil, to the regular outlets to buy, to prevent counterfeit and substandard engine oil damage.