1, should be fully charged before use. The new buy back the electric car should be fully charged before use. Because many electric cars in the shop has been shelved for months, or even six months or more,vertical motorcycle engine it must be fully powered on before use, fully charged it is best not to use immediately, to be allowed to stand for ten minutes.
2, the battery installed to secure the bike. Win to charge the battery installed when the battery mounted on an electric bike should be strong, to prevent the battery from vibration damage when riding. Battery removal is prohibited throw throw, roll, pressure.
3, to keep the battery dry and clean. Always remove the battery cover of dust, dirt, keep the battery dry and clean to prevent the battery self-discharge.
Motorcycle engine parts composition comprising: electric drive and control system, the driving force transmission and other mechanical systems, perform a given task of working devices. Electric drive and control system is the core of the electric vehicle, the biggest difference is different from the internal combustion engine vehicles.
2015年8月16日星期日
2015年7月22日星期三
Motorcycle clutch classification
Motorcycle clutch classification
1) wet multi-plate friction clutch clutch assembly immersed in the oil, CG 125cc two wheel motorcycle engine divided active, driven and separated into three parts. Engine power initiative by sprocket gear cover, cover with a slot surrounding Wuzheng embedded friction plate rubber cork friction material (active tablets), its outer edge bumps placed in an active cover trench along with the rotation of the active part of the clutch. Four steel driven piece by piece fixed inside the driven gear connected basin constitutes driven portion. Lord, driven piece staggered installation, fixed basin connected by internal splines and the transmission shaft, four on the clutch spring gland, pressed against the friction plate and driven piece, motorcycle engine the power to the transmission. The clutch is normally engaged type, when Squeeze the clutch cable so that the collar by hand in the left cover rotation, the collar of the adjusting screw to the right to promote the release rod and the gland, the spring pressure disappears, friction syndrome and driven piece separation.
(2) automatic centrifugal clutch This structure is used in Yamaha CY80, Suzuki FR50 and other mopeds, according to the level of the engine speed is controlled automatically separated from the clutch engagement. Clutch by the initiative, driven and separate engagement mechanism. Active in part by the clutch housing, thrust washer, clutch and other components. Driven in part by the friction plate, center sets and other components.motorcycle engine When the engine is running, as the speed increases, the centrifugal force generated by the ball along with the increases, the axial thrust to overcome the spring tension along the trench separating clutch housing inside outward movement, push the film tight stop oppression press the clutch plate friction clutch in the engaged state levy, the power output. When the engine speed is reduced to idle or turn off, the ball is reduced or no centrifugal force to separate the ball centrifugal force to overcome the spring tension along the trench so that the ball back in situ, clutch.
(3) Shoe automatic clutch this structure is used in a number of miniature motorcycles, the active part driven by the crankshaft mounts, three hoof block assembly seat, and with a pin attached to the holder, spring shoes Block pull to the center of the crankshaft, so to maintain a certain gap between the hoof block assembly of the clutch disc and the driven part of the shoe. When the rotation speed increases, centrifugal force is greater than the hoof block the spring tension, throw it out, when the centrifugal force to a certain value on engagement with the clutch plate friction force to drive the driven part rotates, power is transmitted.
1) wet multi-plate friction clutch clutch assembly immersed in the oil, CG 125cc two wheel motorcycle engine divided active, driven and separated into three parts. Engine power initiative by sprocket gear cover, cover with a slot surrounding Wuzheng embedded friction plate rubber cork friction material (active tablets), its outer edge bumps placed in an active cover trench along with the rotation of the active part of the clutch. Four steel driven piece by piece fixed inside the driven gear connected basin constitutes driven portion. Lord, driven piece staggered installation, fixed basin connected by internal splines and the transmission shaft, four on the clutch spring gland, pressed against the friction plate and driven piece, motorcycle engine the power to the transmission. The clutch is normally engaged type, when Squeeze the clutch cable so that the collar by hand in the left cover rotation, the collar of the adjusting screw to the right to promote the release rod and the gland, the spring pressure disappears, friction syndrome and driven piece separation.
(2) automatic centrifugal clutch This structure is used in Yamaha CY80, Suzuki FR50 and other mopeds, according to the level of the engine speed is controlled automatically separated from the clutch engagement. Clutch by the initiative, driven and separate engagement mechanism. Active in part by the clutch housing, thrust washer, clutch and other components. Driven in part by the friction plate, center sets and other components.motorcycle engine When the engine is running, as the speed increases, the centrifugal force generated by the ball along with the increases, the axial thrust to overcome the spring tension along the trench separating clutch housing inside outward movement, push the film tight stop oppression press the clutch plate friction clutch in the engaged state levy, the power output. When the engine speed is reduced to idle or turn off, the ball is reduced or no centrifugal force to separate the ball centrifugal force to overcome the spring tension along the trench so that the ball back in situ, clutch.
(3) Shoe automatic clutch this structure is used in a number of miniature motorcycles, the active part driven by the crankshaft mounts, three hoof block assembly seat, and with a pin attached to the holder, spring shoes Block pull to the center of the crankshaft, so to maintain a certain gap between the hoof block assembly of the clutch disc and the driven part of the shoe. When the rotation speed increases, centrifugal force is greater than the hoof block the spring tension, throw it out, when the centrifugal force to a certain value on engagement with the clutch plate friction force to drive the driven part rotates, power is transmitted.
2015年3月10日星期二
electric taxi tricycle should also check
Check the gas mixture concentration. Failure symptoms, first check the carburetor throttle. When the engine is working properly, whether catching X vertical organization, failure can not be together, open the phenomenon, if it should be repaired or replaced. Secondly, electric taxi tricycle should also check: float chamber oil is too high; if not leaking float float; main jet needle is open too; air filter is clogged and so on. After the engine flameout, speaking from the carburetor main nozzle, china 50cc Vespa scooter or a drop of oil if the oil outflow, indicating float chamber oil level is too high, it should float up tongue subslice appropriate needle bending or increased acne under appropriate pad sheet to adjust. Check the float, if the rupture leakage occurs, should be welding repair or replacement. Note that after the welding repair will increase the weight of the float, loaded with You must re-commissioning, tricycle three wheel motorcycle to ensure the normal liquid level. Check whether there is a triangular needle Mifengbuyan, etc., if it should be replaced. Check the filter, if clogging, and should be cleaned or replaced.
Check the spark plug arcing conditions. If the spark plug arcing or flashover unusual weak, mixed gas will not burn the whole, the situation will also appear black smoke. Disconnect the spark plug for normal arcing, sparks strong spark plug no fault; Motorcycle plastic parts if not spark the spark plug electrode along the beating, but four weeks flash, flash is not normal spark plug, electric taxi tricycle a new spark plug should be replaced; if the spark plug fouling seriously, it cleaned.
Engine exhaust line black smoke procedure, if pieces of the "chug" sound and "blasting" sound, then the ignition late. If that happens, it is promptly corrected.
2015年3月2日星期一
A brief history of motorcycle engine parts
The original motorcycle, existing in the real shape of the Museum of Science and Technology in Munich, Germany, is a German Daimler on August 29, 1885 patented invention of the world's first motorcycle priority. Limited to 100 years ago, motorcycle chassis manufacturer when the gasoline engine is still in the low-naive status, when the vehicle is still for the carriage technology manufacturing stage, the original motorcycles and modern motorcycles are very different in appearance, structure and performance. Mi motorcycle original frame is made of wood. Judging from wood, a carpenter from the processing. The wheel is made of wood. 3 wheel motorcycle The outer layer covered with a metal wheel. The lower frame is? A square wooden frame on which the engine is placed on both sides of each wooden frame? Small supporting wheels, whose role is to prevent the dumping stationary. As such. This motorcycle engine parts is actually a four landing. Fan-cooled single-cylinder engine, bes tmotorcycle engine the output power by two belts and gear reduction drive, driving the rear wheels forward. Made saddle seat, wrapped in a layer of leather. Its working volume of the engine cylinder 264mL, maximum power 0.37kW (7OOr / min), only one fifth of modern motorcycle engine parts simple. Speed ??of 12km, not much faster than walking. Ding did not spring from other cushioning device, this car was known as the "shock of bone car", it is conceivable.
2015年2月2日星期一
motorcycle engine parts necessary conservation
"A woman of beauty, man car", looks like a natural, understandable. Motorcycle fans enamored of the car, even more than any other category of fans. Because motorcycles aloof personality characteristics china electric scooter manufacturer and other explosive-packed vehicles could never reach a high point, which is the pride of motorcycle fans forever. Smart fans for the conservation of their car has a set of unchangeable law: full protection of the engine.
Engine life is the life of the motorcycle engine parts, if the engine problems, repair them not only time consuming, and expensive. More importantly, if the sudden engine failure occurs, it will directly endanger the lives of motorists. Therefore, motorcycle engine parts is especially important.
First, taxi tricycle clean the dirt, detoxifies
Motorcycles must do each part of the cleaning work, especially with the engine closely related to the various components. Motorcycle work for long periods will inevitably set in the cylinder memory coke, coke and more, inevitably resulting in engine rude, fever and other problems. Therefore, the critical engine parts clean.
Second, enhance motivation, nutrition
Oil is a source of power motorcycle engine parts, folding electric tricycle but it also reduced wear, energy supporting role. So, motorcycle engine parts add the oil is to maintain the most important prerequisite extraordinary brave motorcycle.
Third, smart repair, regeneration beautiful
If your motorcycle mileage in 10000km above, then you should consider to repair a motorcycle. Because long run and wear, not only weakened the cylinder pressure and tightness, but also shortens the life of the engine.
Fourth, anti-wear protection against infringement
New and long mileage cars are required wear protection, security engine covered with a layer of protective film, effectively resist due to friction, damage caused by the operation.
If we can stick to periodically do a few basic maintenance steps above, I believe that your motorcycle engine parts will be forever young and beautiful, as you fight "light" a lot.
2015年1月29日星期四
Winter safety precautions electric taxi tricycle
With winter approaching, the temperature will be getting lower and lower, cold weather every day, in this cold season and summer riding cycling is very different, I believe that many winter Lions in everyday life or from without motorcycle, so send a ride on winter precautions, motorcycle spork wheel want to help the Lions.
① tires:
We weekdays seasons with rubber tires because it is made of, electric taxi tricycle as the temperature rises and becomes soft, with decreasing temperature and harden. Along with hard rubber tires grip is insufficient grip, traction decreases, it is prone to tire slippage. Avoid crash phenomenon caused due to lack of grip, the best way is to reduce the speed, reducing the tilt angle when cornering.
② helmet:
[] Lens fogging the onset of winter, there is a problem has plagued many riders that helmet lens fogging problem, due to low winter temperatures, resulting in larger temperature difference between inside and outside the helmet, wave 125cc cub motorcycle engine is easy to form a mist in the helmet lens position, resulting in sight vague, is not easy to see the road, seriously affecting the riding safety.
Below Lions handed us a very practical approach: The meal was washed with soapy water or apply to the lens (thin layer), electric taxi tricycle wait until after you can get rid of a good play effective anti-fog effect. (Of course, there are anti-fog spray better)
③ warm:
Warm winter electric taxi tricycle is the most important, cold bare skin will be frostbite, if the body temperature is too low can lead to sluggish mind, body reaction slows down, two wheel gasoline scooter will seriously affect riding safety. Therefore, effective insulation, airtight and with a brace of jersey is very important.
Take Peugeot motorcycle riding clothes, for example, a good winter riding clothes is a must have: electric taxi tricycle waterproof, windproof, warm, breathable, and have a safe and protective riding safety warning role. Peugeot motorcycle riding clothes elbow, shoulder, back, popular brands are equipped with EC certified protective gear when the car accident fall, will have a key part to ease the impact of the role of good protection, but also can absorb throw the car body and the ground friction heat generated.
2015年1月25日星期日
electric scooters parts to replace the low-viscosity oil to facilitate start
In the winter, the heat of the engine is not a problem. Instead, start-up performance at low temperatures greatly affected, depending on the low index oil: pour (pour) point, low viscosity pump athleticism. Engine oil is the blood of the specific theoretical concepts in this article will not go into, just from a practical point of lists two wheel chopper motorcycle are available under various minimum temperature of 4T engine oil viscosity grades (according to SAE classification).
Second, before traveling to fully preheat
Winter morning, the outdoor temperature is very low, electric scooters parts in place overnight after the oil has been fully returned to the crankcase, camshaft, rocker arms and other remote parts of poor lubrication conditions, 3 wheel motorcycle must be fully warmed up before driving, right as follows:
1, the car linked into a block, clenched clutch operated several meters, so that the friction of the oil film resistance is reduced in order to reduce the impact Guadang;
2, 125cc automatic transmission hang neutral, step five consecutive times to 6 times start lever, electric scooters parts before starting the ignition role is pre-lubricated pump oil;
3. Turn the ignition switch, foot or electric start;
4. Preheat idle 3 minutes to 8 minutes (according to temperature may be).
2015年1月13日星期二
electric scooters parts parts to replace the low-viscosity oil to facilitate start
In the winter, the heat of the engine is not a problem. Instead, start-up performance at low temperatures greatly affected, depending on the low index oil: pour (pour) point, low viscosity pump athleticism. electric scooters parts Engine oil is the blood of the specific theoretical concepts in this article will not go into, just from a practical point of lists china electric scooter manufacturer are available under various minimum temperature of 4T engine oil viscosity grades (according to SAE classification).
Second, before traveling to fully preheat
Winter morning, the outdoor temperature is very low, electric scooters parts in place overnight after the oil has been fully returned to the crankcase, camshaft, rocker arms and other remote parts of poor lubrication conditions, electric motorcycle motor it must be fully warmed up before driving, right as follows:
1, the car linked into a block, clenched clutch operated several meters, so that the friction of the oil film resistance is reduced in order to reduce the impact Guadang;
2, electric disable tricycle hang neutral, step five consecutive times to 6 times start lever, electric scooters parts parts before starting the ignition role is pre-lubricated pump oil;
3. Turn the ignition switch, foot or electric start;
4. Preheat idle 3 minutes to 8 minutes (according to temperature may be).
2015年1月5日星期一
motorcycle engine parts necessary conservation
"A woman of beauty, man car", looks like a natural, understandable. Motorcycle fans enamored of the car, even more than any other category of fans. Because motorcycles aloof personality characteristics and other explosive-packed vehicles could never reach a high point, which is the pride of motorcycle fans forever. Smart fans for the conservation of their car has a set of unchangeable law: full protection of the engine.
Engine life is the life of the motorcycle engine parts, if the engine problems, repair them not only time consuming, and expensive. More importantly, if the sudden engine failure occurs, electric motorcycle motor it will directly endanger the lives of motorists. Therefore, engine maintenance is especially important.
First, clean the dirt, detoxifies
Motorcycles must do each part of the cleaning work, especially with the engine closely related to the various components. Motorcycle work for long periods will inevitably set in the cylinder memory coke, coke and more, inevitably resulting in engine rude, fever and other problems. Therefore, the critical engine parts clean.
Second, enhance motivation, nutrition
Oil is a source of power motorcycle engine parts, but it also reduced wear, energy supporting role. So, bes tmotorcycle engine add the oil is to maintain the most important prerequisite extraordinary brave motorcycle.
Third, smart repair, regeneration beautiful
If your motorcycle mileage in 10000km above, then you should consider to repair a motorcycle. Because long run and wear, not only weakened the cylinder pressure and tightness, but also shortens the life of the engine.
Fourth, anti-wear protection against infringement
New and long mileage cars are required wear protection, security engine covered with a layer of protective film, effectively resist due to friction, damage caused by the operation.
If we can stick to periodically do a few basic maintenance steps above, I believe that your motorcycle engine parts will be forever young and beautiful, as you fight "light" a lot.
2014年12月28日星期日
electric scooters parts to replace the low-viscosity oil to facilitate start
2014年12月16日星期二
electric scooters parts meticulous maintenance
Pay attention to regular maintenance of common sense to replace the oil and oil filter, clean the air filter and do fine maintenance.
(1) oil and oil filter replacement engine operation is inseparable from the oil lubrication, otherwise it causes friction, engine internal parts will soon be ahead of wear and failure. Will take away the run when the oil lubrication of parts produced fine metal particles and other impurities to ensure the smooth running, so that after a period of time to run electric scooters parts,motorcycle engine types oil becomes dirty, so the user must regularly go to a professional repair shop to replace the engine oil . Necessary to ensure long-term oil filter oil filter, lubricate engine parts to ensure quality of pure oil, so inevitably the residual trace of wear metal particles and other impurities, so replace the oil filter also is to make your car driving on normal filter .
(2) air filter cleaning power comes from burning gasoline engine is running, the gasoline burning need clean air, electric scooters parts Qing's role is to provide fresh air to the engine. However, we all understand that the natural environment is not too clean air, so the air filter in the air filter after a period of time will accumulate more dust, and impede the entry of air, affecting the normal operation of the engine, it must be cleaned regularly air filter, to ensure the normal breathing of the engine.
2014年12月8日星期一
Analysis of electric scooters parts consumer psychology
Focusing on identity, stability and strong middle-aged consumers are in the mature stage of life, they are most stable life. They are no longer as fashionable as youth, excessive consumption, but pay attention to establish and maintain their own social role played by consumer standards and adapt to consumer content, such as middle-aged consumers to pay more attention to reflect the personal temperament and connotation.
Experience, intellect and strong emphasis on the practical utility of their electric scooters parts products, uniform price and appearance, from the desire to buy into the process of implementation of the formation of the purchase often after analysis, comparison and judgment, arbitrary small. In the process of buying even in the face of exaggerated marketing staff presentation and deceptive solicitation nor whom shaken, electric motorcycle scooter but be calm and rational analysis, comparison, and selection of judges to make their buying behavior as accurately as possible and reasonable.
Ends meet, plan and strong in the consumer, they generally uphold the principles of living within our means, to develop a frugal, cost-conscious habits, consumer spending plan is strong, rarely unplanned and impromptu consumer spending phenomenon. They tend to focus on electric scooters parts especially the price and availability of products in the car, and the factors related to this, such as the motorized variety of products, brand, quality, purpose to conduct a comprehensive measure before making a choice.
Experience, intellect and strong emphasis on the practical utility of their electric scooters parts products, uniform price and appearance, from the desire to buy into the process of implementation of the formation of the purchase often after analysis, comparison and judgment, arbitrary small. In the process of buying even in the face of exaggerated marketing staff presentation and deceptive solicitation nor whom shaken, electric motorcycle scooter but be calm and rational analysis, comparison, and selection of judges to make their buying behavior as accurately as possible and reasonable.
Ends meet, plan and strong in the consumer, they generally uphold the principles of living within our means, to develop a frugal, cost-conscious habits, consumer spending plan is strong, rarely unplanned and impromptu consumer spending phenomenon. They tend to focus on electric scooters parts especially the price and availability of products in the car, and the factors related to this, such as the motorized variety of products, brand, quality, purpose to conduct a comprehensive measure before making a choice.
2014年11月26日星期三
Introduction motorcycle engine parts clutch
motorcycle engine parts clutch assembly work in the oil dip, sub-active, driven and separated into three parts. By the power of the engine cover sprocket gear drive initiative, opened a trench around the hood, Wuzheng embedded with rubber cork lining friction material (active tablets), motorcycle engine parts outer edge bumps placed in the active trench cover along with the rotation of the active part of the clutch. motorcycle engine parts four steel follower element through the inner teeth of the follower element is connected to a fixed basin constitutes a driven portion. Lord, driven piece staggered installation, fixing pots connected by Motorcycle spare part spline shaft and gearbox, clutch spring in four gland on, pressed the friction plate and driven piece, motorcycle engine parts will power to the transmission. Clutch engagement is normally based, when Squeeze the clutch cable by hand so that the collar in the left cover rotation, the collar of the adjusting screw to the right to promote the release rod and the gland, the spring pressure is removed, the friction characteristics and driven piece separation.
2014年11月9日星期日
Motorcycle engine parts is to enter the cylinder to ignite the air-fuel mixture
Motorcycle engine parts is to enter the cylinder to ignite the air-fuel mixture so that the thermal energy generated by combustion into mechanical energy, by the crankshaft and the driving dynamics of the vehicle into mechanical power is transmitted through the motorcycle rear wheel drive mechanism. Motorcycle engine parts means are used in internal motorcycle engine size engine; people are accustomed to using a diesel engine is called diesel fuel, while the use of gasoline-fueled engine is said to gasoline. Because gasoline engine with a light weight, small size, noise, vibration, start easy and low cost advantages, so widely used gasoline motorcycle as its power plant. Motorcycle engine parts can be understood literally as electric scooter motor generate power, according to the energy transition in different ways, can be divided into electrical engineering (power → mechanical energy), hydraulic machine (hydro → mechanical energy), wind turbine (wind → mechanical energy). engine atomic Energy (IAEA → mechanical energy), heat machine (heat → mechanical energy), etc. Heat can be divided into an external combustion engine with internal combustion motorcycle engine is a heat engine.
订阅:
博文 (Atom)











